loader-logo

HD4000

HD4000

The HD4000 is a Class H amplifier with 4000 W @ Bridge 4Ω power output in a 19’’/2U format, ideal for use in fixed installations. HD4000 incorporates the soft-start circuit with gradual volume increase, clip limiters and special protection features such as temperature control, overcurrent, DC output and anti-short circuit on the outputs.

The whole HD series is based on our proven High Dynamic Power technology, which means higher efficiency in the ratio of power output versus energy consumed.

Voltage Gain32 dB
Input Sensitivity1.88 V
Input Impedance
20 kΩ
Slew Rate+/-12 V/μs
Output Power (1 kHz – 0,1% THD) (1)

Stereo 8 Ω / 650 + 650 W
Stereo 4 Ω / 1200 + 1200 W
Stereo 2 Ω / 2100 + 2100 W (2)
Bridge 8 Ω / 2400 W
Bridge 4 Ω / 4200 W (2)
Average Current draw (3)

7 A @ 230 V AC
Frequency Response20 Hz – 20 kHz (0/-1 dB)
Damping Factor (1 kHz @ 8 Ω)350
Crosstalk65 dB
S/N Ratio (A-weighted)108 dB (A)
Mains220 – 240 V AC- 50/60 Hz
Dimensions (HxWxD)88 x 482 x 440 mm
Weight
21 kg

(1) Continuous burst tone 20 ms (0 dB) / 480 ms (-20 dB) in accordance with EIA RS-490 and IEC 60268-3(IHF A-202).

(2) Specifically designed for long term operation in bridge 4 Ω at full power.

(3) Driving the amplifier at 2 Ω channel / 4 Ω bridge at full power mode in poor ventilation conditions may cause a thermal overload protection. 2 Ω power is time limited by mains circuit breaker.

Data Sheet

Download

General user’s manual

Download

Related Products

HD1200

HD1200 Power Amplifiers

HD3200

HD3200 Power Amplifiers