The HD1200 is a Class AB amplifier with 600 + 600 W @ Stereo 4Ω power output in a 19’’/2U format, ideal for use in fixed installations. HD1200 incorporates the soft-start circuit with gradual volume increase, clip limiters and special protection features such as temperature control, overcurrent, DC output and anti-short circuit on the outputs.
The whole HD series is based on our proven High Dynamic Power technology, which means higher efficiency in the ratio of power output versus energy consumed.
| Voltage Gain | 32 dB |
| Input Sensitivity | 1.25 V |
| Input Impedance | 20 kΩ |
| Slew Rate | +/-12 V/μs |
| Output Power (1 kHz – 0,1% THD) (1) | Stereo 8 Ω / 350 + 350 W Stereo 4 Ω / 600 + 600 W Stereo 2 Ω / 850 + 850 W (2) Bridge 8 Ω / 1200 W Bridge 4 Ω / 1700 W (2) |
| Average Current draw (3) | 4 A @ 230 V AC |
| Frequency Response | 20 Hz – 20 kHz (0/-1 dB) |
| Damping Factor (1 kHz @ 8 Ω) | 300 |
| Crosstalk | 60 dB |
| S/N Ratio (A-weighted) | 104 dB (A) |
| Mains | 220 – 240 V AC- 50/60 Hz |
| Dimensions (HxWxD) | 88 x 482 x 420 mm |
| Weight | 15 kg |
(1) Continuous burst tone 20 ms (0 dB) / 480 ms (-20 dB) in accordance with EIA RS-490 and IEC 60268-3(IHF A-202).
(2) Driving the amplifier at 2 Ω channel / 4 Ω bridge at full power mode in poor ventilation conditions may cause a thermal overload protection. 2 Ω power is time limited by mains circuit breaker.
(3) Heavy duty musical program.
