loader-logo

HD800

HD800

The HD800 is a Class AB amplifier with 400 + 400 W @ Stereo 4Ω power output in a 19’’/2U format, ideal for use in fixed installations. HD800 incorporates the soft-start circuit with gradual volume increase, clip limiters and special protection features such as temperature control, overcurrent, DC output and anti-short circuit on the outputs.

The whole HD series is based on our proven High Dynamic Power technology, which means higher efficiency in the ratio of power output versus energy consumed.

Voltage Gain32 dB
Input Sensitivity1 V
Input Impedance
20 kΩ
Slew Rate+/-12 V/μs
Output Power (1 kHz – 0,1% THD) (1)

Stereo 8 Ω / 230 + 230 W
Stereo 4 Ω / 400 + 400 W
Stereo 2 Ω / 550 + 550 W (2)
Bridge 8 Ω / 800 W
Bridge 4 Ω / 1100 W (2)

Average Current draw (3)

3 A @ 230 V AC
Frequency Response20 Hz – 20 kHz (0/-1 dB)
Damping Factor (1 kHz @ 8 Ω)280
Crosstalk60 dB
S/N Ratio (A-weighted)102 dB (A)
Mains220 – 240 V AC- 50/60 Hz
Dimensions (HxWxD)88 x 482 x 420 mm
Weight
14 kg

(1) Continuous burst tone 20 ms (0 dB) / 480 ms (-20 dB) in accordance with EIA RS-490 and IEC 60268-3(IHF A-202).

(2) Driving the amplifier at 2 Ω channel / 4 Ω bridge at full power mode in poor ventilation conditions may cause a thermal overload protection. 2 Ω power is time limited by mains circuit breaker.

(3) Heavy duty musical program.

Data Sheet

Download

General user’s manual

Download

Related Products

HD4000

HD4000 Power Amplifiers

TPD

Processing Amplifiers TPD

HD1200

HD1200 Power Amplifiers

HD2000

HD2000 Power Amplifiers

HD3200

HD3200 Power Amplifiers
  • 1x D-LINK DAP-2360 Wireless Access Point + support
  • 1x Access Point power supply
  • 1x Ethernet cable, ECRJ45-1200 with housing shield both ends
  • 2x Ethernet cable, ECRJ45-500 with housing shield both ends
  • 1x Neutrik cable extension (RJ-45 feedthrough)
  • 1x USB Pendrive – with DSP Studio software

Transport aluminium briefcase included