loader-logo

HD2000

HD2000

The HD2000 is a Class H amplifier with 1000 + 1000 W @ Stereo 4Ω power output in a 19’’/2U format, ideal for use in fixed installations. HD2000 incorporates the soft-start circuit with gradual volume increase, clip limiters and special protection features such as temperature control, overcurrent, DC output and anti-short circuit on the outputs.

The whole HD series is based on our proven High Dynamic Power technology, which means higher efficiency in the ratio of power output versus energy consumed.

Voltage Gain32 dB
Input Sensitivity1.74 V
Input Impedance
20 kΩ
Slew Rate+/-12 V/μs
Output Power (1 kHz – 0,1% THD) (1)

Stereo 8 Ω / 600 + 600 W
Stereo 4 Ω / 1000 + 1000 W
Stereo 2 Ω / 1500 + 1500 W (2)
Bridge 8 Ω / 2000 W
Bridge 4 Ω / 3000 W (2)
Average Current draw (3)

5 A @ 230 V AC
Frequency Response20 Hz – 20 kHz (0/-1 dB)
Damping Factor (1 kHz @ 8 Ω)350
Crosstalk65 dB
S/N Ratio (A-weighted)105 dB (A)
Mains220 – 240 V AC- 50/60 Hz
Dimensions (HxWxD)88 x 482 x 440 mm
Weight
18 kg

(1) Continuous burst tone 20 ms (0 dB) / 480 ms (-20 dB) in accordance with EIA RS-490 and IEC 60268-3(IHF A-202).

(2) Driving the amplifier at 2 Ω channel / 4 Ω bridge at full power mode in poor ventilation conditions may cause a thermal overload protection. 2 Ω power is time limited by mains circuit breaker.

(3) Heavy duty musical program

Data Sheet

Download

General user’s manual

Download

Guide High Impedance Installation

Download

Related Products

HD800

HD800 Power Amplifiers

HD1200

HD1200 Power Amplifiers

HD3200

HD3200 Power Amplifiers

HD4000

HD4000 Power Amplifiers

TPD

Processing Amplifiers TPD
  • 1x D-LINK DAP-2360 Wireless Access Point + support
  • 1x Access Point power supply
  • 1x Ethernet cable, ECRJ45-1200 with housing shield both ends
  • 2x Ethernet cable, ECRJ45-500 with housing shield both ends
  • 1x Neutrik cable extension (RJ-45 feedthrough)
  • 1x USB Pendrive – with DSP Studio software

Transport aluminium briefcase included